A table in this document shows some of the available devices. The pick lists are found under SYSTEM SETUP / COM PORT from the main menu screen. After choosing a vendor, the user picks the protocol to communicate over (J1708 or PLC) and picks the device which is attached to the vehicle. When Toolbox is installed, the Noregon driver is also installed Therefore the pick list will always include Noregon as a vendor and the devices that it supports. Toolbox will provide a “pick list” of all vendors that it finds on the PC.
The software driver for the adapter is supplied by the adapter vendor and must be loaded on the PC. However, our Toolbox software will work with any adapter that is RP1210A compliant. Meritor WABCO does not manufacture hardware adapter devices for communications with the vehicle data bus (J1587or PLC).
For copies of Meritor WABCO service literature, contact the ArvinMeritor Customer Service Center at 80 or visit our website: NOTE: For complete Meritor WABCO maintenance information, refer to the appropriate maintenance manual which is listed in this manual at the beginning of each product section. Activates system components to verify system integrity, correct component operation and installation wiring.Provides a link to service information testing procedures, etc.Displays both active and stored system faults, as well as the appropriate repair instructions.Displays both constant (e.g., ECU number) and changing (e.g., RPMs) information from the system under test.The program provides four basic functions: Meritor WABCO TOOLBOX Software provides PC diagnostic capabilities for Meritor WABCO tractor and trailer pneumatic ABS, hydraulic ABS, the electronic leveling module (ELM) for both tractor and trailer and Electronically Controlled Air Suspensions (ECAS) for buses. Meritor Wabco Toolbox 8.0, diagnostic software for Meritor Wabco tractor and trailer pneumatic ABS, hydraulic ABS, the electronic leveling module (ELM) for both tractor and trailer and Electronically Controlled Air Suspensions (ECAS) for buses.
0 kommentar(er)
